Find a Service Center
- Radial Shaft Seal
- 933.45 mm Shaft Diameter
- 984.25 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temp Description | w/6 Lugs |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 933.45 mm |
| Seal Application | General Purpose |
| Lip Type | Non-Split |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile |
| Case Construction | Steel Case w/Inner Case |
| Surface Speed [Nom] | 5,000 ft/min |
| Inch/Metric | Metric |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Seal Design | Bonded Design |
| Pressure | 10 psi |
| Housing Bore Dia. | 984.25 mm |
| Temperature Range [Max] | 250 °F |
| Construction | HDS1 |
| Temperature Range [Min] | -40 °F |
| Weight | 19.775 LB |
| EAN or UPC | 85311147293 |
