Find a Service Center
- Radial Shaft Seal
- 370 mm Shaft Diameter
- 420 mm Housing Bore Diameter
- 25 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Construction | HDS1 |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 370 mm |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 250 °F |
| Seal Application | General Purpose |
| Lip Material | Nitrile |
| Temp Description | w/4 Lugs |
| Inch/Metric | Metric |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Housing Bore Dia. | 420 mm |
| Lip Type | Non-Split |
| Seal Design | Bonded Design |
| Case Construction | Steel Case w/Inner Case |
| Weight | 6.594 LB |
| EAN or UPC | 85311991056 |
