Find a Service Center
- Radial Shaft Seal
- 380 mm Shaft Diameter
- 440 mm Housing Bore Diameter
- 25 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Inch/Metric | Metric |
| Surface Speed [Nom] | 5,000 ft/min |
| Lip Material | Nitrile |
| Temperature Range [Max] | 250 °F |
| Lip Type | Non-Split |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Pressure | 15 psi |
| Seal Design | Molded Design |
| Housing Bore Dia. | 440 mm |
| Construction | HDS2 |
| Shaft Dia. | 380 mm |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Weight | 5.87 LB |
| EAN or UPC | 85311173070 |
