Find a Service Center
- Radial Shaft Seal
- 1016 mm Shaft Diameter
- 1016.8 mm Housing Bore Diameter
- 22.23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Type | Non-Split |
| Spring Material | Carbon Steel Garter |
| Seal Design | Bonded Design |
| Temperature Range [Max] | 400 °F |
| Housing Bore Dia. | 1016.8 mm |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 5,000 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Seal Application | General Purpose |
| Construction | HDS1 |
| Inch/Metric | Metric |
| Pressure | 10 psi |
| Shaft Dia. | 1016 mm |
| Lip Material | Fluoroelastomer - Viton |
| Weight | 22.384 LB |
| EAN or UPC | 85311148900 |
