Find a Service Center
- Radial Shaft Seal
- 1117.6 mm Shaft Diameter
- 1193.8 mm Housing Bore Diameter
- 31.75 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Style | Internal |
| Surface Speed [Nom] | 5,000 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Metric |
| Seal Design | Bonded Design |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 1193.8 mm |
| Temperature Range [Max] | 250 °F |
| Construction | HDS1 |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Material | Nitrile |
| Pressure | 10 psi |
| Temp Description | w/8 Lugs |
| Shaft Dia. | 1117.6 mm |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Non-Split |
| Weight | 23.604 LB |
| EAN or UPC | 85311150149 |
