Find a Service Center
- Radial Shaft Seal
- 559.993 mm Shaft Diameter
- 600.329 mm Housing Bore Diameter
- 18.008 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Construction | HDS2 |
| Seal Design | Molded Design |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Non-Split |
| Shaft Dia. | 559.993 mm |
| Lip Material | Nitrile |
| Surface Speed [Nom] | 5,000 ft/min |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Metric |
| Temperature Range [Max] | 250 °F |
| Housing Bore Dia. | 600.329 mm |
| Seal Application | General Purpose |
| Temperature Range [Min] | -40 °F |
| Pressure | 15 psi |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 10.396 LB |
| EAN or UPC | 85311136747 |
