Find a Service Center
- Radial Shaft Seal
- 190.5 mm Shaft Diameter
- 235.153 mm Housing Bore Diameter
- 15.875 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Style | Internal |
| Lip Type | Non-Split |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Lip Material | Fluoroelastomer - Viton |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Shaft Dia. | 190.5 mm |
| Case Construction | Steel Case w/Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | Assembled Design |
| Inch/Metric | Metric |
| Construction | HDS1 |
| Temperature Range [Max] | 400 °F |
| Housing Bore Dia. | 235.153 mm |
| Pressure | 10 psi |
| Spring Material | Carbon Steel Garter |
| Weight | 3.295 LB |
| EAN or UPC | 85311087230 |
