Find a Service Center
- Radial Shaft Seal
- 750 mm Shaft Diameter
- 800 mm Housing Bore Diameter
- 25 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 5,000 ft/min |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 750 mm |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Metric |
| Lip Type | Non-Split |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Housing Bore Dia. | 800 mm |
| Lip Style | Internal |
| Construction | HDS2 |
| Seal Design | Molded Design |
| Temperature Range [Max] | 250 °F |
| Pressure | 15 psi |
| Weight | 11.731 LB |
| EAN or UPC | 85311162340 |
