
- Radial Shaft Seal
- 990 mm Shaft Diameter
- 1045 mm Housing Bore Diameter
- 25 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Cover/Compensation Ring/Plate Required | No |
Temperature Range [Min] | -40 °F |
Lip Material | Nitrile |
Seal Application | General Purpose |
Inch/Metric | Metric |
Shaft Dia. | 990 mm |
Pressure | 10 psi |
Lip Type | Non-Split |
Spring Material | Carbon Steel Garter |
Construction | HDS1 |
Housing Bore Dia. | 1045 mm |
Case Construction | Steel Case w/Inner Case |
Lip Style | Internal |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Temperature Range [Max] | 250 °F |
Seal Design | Bonded Design |
Weight | 16.306 LB |
EAN or UPC | 85311173162 |
