Find a Service Center
Alternate Products
- Cam Follower
- 1 1/2" OD Straight Roller
- 5/8" Standard Stud
- 5/8-18 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Dynamic Load Rating | 2520 lbf |
| Inch/Metric | Inch |
| Roller Dia. | 1 1/2 in |
| Roller Type | Straight |
| Enclosure | Sealed |
| Thread Size | 5/8 |
| End Type | Metal Plug |
| Stud Length | 1.5 in |
| Bearing Type | Ball Bearing |
| Stud Dia. | 0.625 in |
| Threads per Inch | 18 |
| Material | Steel |
| Thread Type | UNF |
| Roller Width | 1 3/16 in |
| Stud Type | Standard |
| Weight | 0.5 LB |
| EAN or UPC | 651041149083 |
