Find a Service Center
Alternate Products
- Cam Follower
- 4" OD Straight Roller
- 1 1/4" Eccentric Stud
- 1 1/4-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Stud Length | 2 3/4 in |
| Roller Dia. | 4 in |
| Roller Type | Straight |
| Enclosure | Sealed |
| Threads per Inch | 12 |
| End Type | Metal Plug |
| Inch/Metric | Inch |
| Stud Dia. | 1 1/4 in |
| Thread Type | UNF |
| Dynamic Load Rating | 14300 lbf |
| Thread Size | 1 1/4 |
| Stud Type | Eccentric |
| Roller Width | 2 in |
| Bearing Type | Tapered Roller Bearing |
| Material | Steel |
| Weight | 7.1 LB |
| EAN or UPC | 651041185111 |
