Find a Service Center
Alternate Products
- Cam Follower
- 8 1/2" OD V-Groove Roller
- 2 1/2" Standard Stud
- 2 1/2-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Stud Type | Standard |
| Material | Steel |
| Dynamic Load Rating | 35800 lbf |
| End Type | Metal Plug |
| Enclosure | Sealed |
| Roller Type | V-Groove |
| Stud Length | 5.5 in |
| Thread Size | 2 1/2 |
| Bearing Type | Tapered Roller Bearing |
| Roller Width | 3 in |
| Thread Type | UNF |
| Roller Dia. | 8 1/2 in |
| Stud Dia. | 2.5 in |
| Inch/Metric | Inch |
| Threads per Inch | 12 |
| Weight | 46.0 LB |
| EAN or UPC | 651041149403 |
