Find a Service Center
- Single Row Angular Contact Bearing, 40 mm ID x 80 mm OD x 18 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| O.D. Type | Straight |
| Inch/Metric | Metric Bore |
| Contact Angle | 40° |
| Seal Material | None |
| Lubricant | Oil Preservative |
| Radial Internal Clearance | C3 |
| Outer Ring Width | 18 mm |
| Capacity | Standard Capacity |
| icNumber | 7695814 |
| Preload Level | None |
| Cage Type | Metal |
| Enclosure | Open |
| Seal Type | Unsealed |
| Bore Type | Round Bore |
| O.D. | 80 mm |
| Precision | Standard |
| Static Load Rating [Max] | 5200 lbf |
| Origin | Single Row Angular Contact |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision Level | Standard (ABEC 1) |
| I.D. | 40 mm |
| Material | Steel |
| Cage Material | Brass/Bronze |
| Dynamic Load Rating | 8150 lbf |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Fillet Radius | 0.039 in |
| No. in Set | Single Bearing |
| Bearing Type | Angular Contact |
| Internal Design | Universal Mounting |
| Rows of Balls | Single |
| Inner Ring Width | 18 mm |
| Locking Device | No Locking Device |
| Weight | 0.97 LB |
| EAN or UPC | 87796044029 |
