Find a Service Center
- Single Row Angular Contact Bearing, 65 mm ID x 120 mm OD x 23 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| I.D. | 65 mm |
| Ball Material | Steel |
| Lubricant | Oil Preservative |
| Inch/Metric | Metric Bore |
| Precision Level | Standard (ABEC 1) |
| Fillet Radius | 0.059 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | None |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 16300 lbf |
| Bore Type | Round Bore |
| Contact Angle | 40° |
| O.D. Type | Straight |
| Locking Device | No Locking Device |
| Origin | Single Row Angular Contact |
| icNumber | 7695839 |
| Static Load Rating [Max] | 11800 lbf |
| Capacity | Standard Capacity |
| Cage Material | Brass/Bronze |
| Bearing Type | Angular Contact |
| Outer Ring Width | 23 mm |
| Enclosure | Open |
| O.D. | 120 mm |
| Preload Level | None |
| Precision | Standard |
| Cage Type | Metal |
| Snap Ring | No Snap Ring |
| Internal Design | Universal Mounting |
| Rows of Balls | Single |
| Material | Steel |
| Inner Ring Width | 23 mm |
| Seal Type | Unsealed |
| No. in Set | Single Bearing |
| Weight | 2.34 LB |
| EAN or UPC | 87796068322 |
