Find a Service Center
- Single Row Angular Contact Bearing, 20 mm ID x 52 mm OD x 15 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact medium 7300WN series is dimensionally interchangeable with the radial 300 series.The features of the 7000WN series include a refined bore diameter. The 7300WN series can sustain heavier thrust and combined loads applications in which the thrust load is in one direction or,in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust is present in both directions or where axial displacement of the shaft must be restricted. For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Size 7303W have a 20° contact angle and a steel cage.Sizes 7304WN through 7318WN have a 40° contact angle and a one-piece, ball poloted, pressed brass cage. Larger sizes 7319WN through 7330WN have a 40° contact angle and a one-piece, outer-ring-piloted, high strength, machined bronze cage.Sizes 7306WN to 7318WN also available with a one-piece, high strength, machined bronze retainer (MBR).
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| I.D. | 20 mm |
| Fillet Radius | 0.039 in |
| Enclosure | Open |
| Bore Type | Round Bore |
| Dynamic Load Rating | 4400 lbf |
| Inner Ring Width | 15 mm |
| O.D. Type | Straight |
| Outer Ring Width | 15 mm |
| No. in Set | Single Bearing |
| Bearing Type | Angular Contact |
| Rows of Balls | Single |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance | C3 |
| Ball Material | Steel |
| Cage Type | Metal |
| Cage Material | Brass/Bronze |
| Static Load Rating [Max] | 2160 lbf |
| Seal Type | Unsealed |
| Origin | Single Row Angular Contact |
| O.D. | 52 mm |
| Material | Steel |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Oil Preservative |
| Precision | Standard |
| Preload Level | None |
| Locking Device | No Locking Device |
| Seal Material | None |
| icNumber | 7706278 |
| Contact Angle | 40° |
| Weight | 0.375 LB |
| EAN or UPC | 87796046528 |
