Find a Service Center
- Single Row Angular Contact Bearing, 40 mm ID x 110 mm OD x 27 mm Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), 20° Contact Angle
description
- The angular contact Heavy 7400 series is dimensionally interchangeable with the radial 400 series.Those sizes with a "WN" suffix include a refined bore diameter tolerance. The 7400 series can sustain heavier thrust and combined loads than the 7300WN series. A single bearing is recommended for applications in which the thrust load is in one direciton or, in the case of combined loads, the thrust load is high in relation to the radial load.A duplex pair is recommended for application where thrust is present in both dirctions or where axial displacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Those sizes with a suffix "W" have a 20° contact angle and a steel retainer.Those sizes with a suffix "PW" have a 35° contact angle and a a steel retainer.Those sizes with a "WN" suffix have a 40° contact angle and a one-piece, high-strength macined bronzed cage.
applications
- Agricultural
- Chemical
- Utilities
- General industrial
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 22400 lbf |
| No. in Set | Single Bearing |
| O.D. Type | Straight |
| Seal Material | None |
| Inch/Metric | Metric Bore |
| Snap Ring | No Snap Ring |
| Preload Level | None |
| Precision | Standard |
| Bearing Type | Angular Contact |
| Enclosure | Open |
| Locking Device | No Locking Device |
| Bore Type | Round Bore |
| Fillet Radius | 0.08 in |
| Seal Type | Unsealed |
| Origin | Single Row Angular Contact |
| Static Load Rating [Max] | 12700 lbf |
| Cage Material | Steel |
| Capacity | Standard Capacity |
| Contact Angle | 20° |
| Material | Steel |
| Lubricant | Oil Preservative |
| Ball Material | Steel |
| icNumber | 7696687 |
| Outer Ring Width | 27 mm |
| Rows of Balls | Single |
| I.D. | 40 mm |
| Inner Ring Width | 27 mm |
| Precision Level | Standard (ABEC 1) |
| O.D. | 110 mm |
| Internal Design | Universal Mounting |
| Cage Type | Metal |
| Weight | 2.89 LB |
| EAN or UPC | 87796047013 |
