Find a Service Center
- 1.9375" Shaft, 3.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Labyrinth Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Type | Ball Bearing |
| Bearing Design | Non-Expansion |
| Bolt Hole Length | 1 1/8 in |
| End Type | Open End |
| Seal Type | Labyrinth Seals |
| Base Height | 1 5/16 in |
| Shaft Dia. | 1.9375 in |
| Mounted Unit Duty | Heavy-Duty |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Base Width | 3 1/8 in |
| Bearing Insert | GN115KLLB |
| Bolt Holes | 2 |
| Pillow Block Type | Thru-Bolt |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Spacing | 9 in |
| Bolt Hole Width | 3/4 in |
| Housing Material | Cast Iron |
| Base Length | 11 3/8 in |
| Insert Type | Steel Insert |
| Temperature Range [Max] | 350 °F |
| Housing Construction | 1 Piece |
| Collar No. | SN115K |
| Weight | 16.896 LB |
| EAN or UPC | 87796060555 |
