Find a Service Center
- 1.4375" Shaft, 2.75" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Collar O.D. | 2 3/16 in |
| Housing Construction | 1 Piece |
| Insert Type | Steel Insert |
| End Type | Open End |
| Seal Type | Labyrinth Seals |
| Housing Height | 4 13/16 in |
| Inch/Metric | Inch |
| Housing Material | Cast Iron |
| Bolt Hole Length | 3/4 in |
| Lubrication | Relubricatable |
| Locking Device | Eccentric Locking Collar |
| Base Length | 10 5/8 in |
| Bearing Design | Non-Expansion |
| Bolt Size | 5/8 in |
| Shaft Dia. | 1.4375 in |
| Mounted Unit Duty | Heavy-Duty |
| Series | LSAO Series |
| Overall Width | 2 3/4 in |
| Bolt Holes | 2 |
| Temperature Range [Max] | 350 °F |
| Bolt Hole Width | 1 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Collar No. | SN107K |
| Bolt Hole Spacing | 8 1/4 in |
| Bearing Insert | GN107KRRB |
| Length Through Bore | 2.03125 in |
| Base Width | 2 3/4 in |
| Bearing Type | Ball Bearing |
| Housing Width | 3 3/8 in |
| Base Height | 15/16 in |
| Weight | 9.578 LB |
| EAN or UPC | 87796059139 |
