Find a Service Center
- 2.9375" Shaft, 4.5625" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Length | 15 3/8 in |
| Bearing Insert | GN215KRRB |
| Lubrication | Relubricatable |
| Length Through Bore | 3.9375 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Holes | 2 |
| Housing Height | 8 9/16 in |
| Bolt Size | 7/8 in |
| Overall Width | 4 3/8 in |
| Bolt Hole Spacing | 12 3/8 in |
| Bearing Design | Non-Expansion |
| Collar No. | SN215K |
| Bolt Hole Length | 1 in |
| Seal Type | Labyrinth Seals |
| Inch/Metric | Inch |
| Collar O.D. | 4 7/16 in |
| Housing Width | 8 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 1 3/8 in |
| Temperature Range [Max] | 350 °F |
| Insert Type | Steel Insert |
| Housing Material | Cast Iron |
| End Type | Open End |
| Mounted Unit Duty | Heavy-Duty |
| Series | LSAO Series |
| Base Height | 1 7/8 in |
| Base Width | 4 3/8 in |
| Bearing Type | Ball Bearing |
| Housing Construction | 1 Piece |
| Shaft Dia. | 2.9375 in |
| Weight | 44.24 LB |
| EAN or UPC | 87796061880 |
