Fafnir | RAK1 1/4 | RAK Series Cast Iron Pillow Block

RAK1 1/4

RAK Series Cast Iron Pillow Block

Item #101922067

1.25" Shaft, 1.8125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar

Auto Replenish

each One-time purchase

Product Details

1.25" Shaft, 1.8125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar

Recommended for industrial applications where normal loads are encountered. They ensure the user the advantages of a compact, one-piece housing, which can be mounted in any position. The pillow blocks are self aligning at mounting with the spherical O.D. of the bearing fitting into a corresponding spherical housing seat. These units are prelubricated and ready for immediate installation. A grease fitting provides for relubrication if required. Self-locking collars are supplied with all units.

Specifications

End Type	Open End
Insert Type	Steel Insert
Housing Construction	1 Piece
Bolt Hole Length	31/32 in
Collar No.	S1104K
Bearing Type	Ball Bearing
Bearing Design	Non-Expansion
Dynamic Load Rating	6,400.00 lbf
Bolt Hole Width	9/16 in
Lubrication	Relubricatable
Base Length	6 9/16 in
Bearing Insert	G1104KRRB
Collar O.D.	2 1/8 in
Pillow Block Type	Thru-Bolt
Base Width	1 27/32 in
Overall Width	2 11/64 in
Center Line to Base Dimension [Min]	1 13/16 in
Housing Height	3 11/16 in
Locking Device	Eccentric Locking Collar
Shaft Dia.	1 1/4 in
Housing Material	Cast Iron
Series	RAK Series
Length Through Bore	1 31/64 in
Seal Type	Contact Seals
Base Height	21/32 in
Bolt Size	1/2 in
Mounted Unit Duty	Normal-Duty
Bolt Holes	2
Bolt Hole Spacing	5 1/8 in
Outer Ring Size	207
Inch/Metric	Inch
Weight	4.292 LB
EAN or UPC	87796058460