Find a Service Center
- 1.25" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Length | 31/32 in |
| Temperature Range [Max] | 250 °F |
| Inch/Metric | Inch |
| Shaft Dia. | 1.25 in |
| Housing Construction | 1 Piece |
| Collar No. | S1104K |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 5 1/8 in |
| Bolt | 1/2 in |
| Outer Ring Size | 207 |
| Collar O.D. | 2 1/8 in |
| Base Width | 1 25/32 in |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Length Through Bore | 1.48438 in |
| Series | RAK Series |
| Seal Type | Contact Seals |
| End Type | Open End |
| Housing Material | Polymer |
| Bearing Insert | G1104KRRB TDCF |
| Static Load Rating [Max] | 3400 lbf |
| Overall Width | 2 11/64 in |
| Housing Height | 3 5/8 in |
| Bearing Type | Ball Bearing |
| Locking Device | Eccentric Locking Collar |
| Dynamic Load Rating | 6400 lbf |
| Bolt Holes | 2 |
| Base Length | 6 9/16 in |
| Base Height | 21/32 in |
| Bolt Hole Width | 9/16 in |
| Pillow Block Type | Thru-Bolt |
| Weight | 2.606 LB |
| EAN or UPC | 87796180086 |
-
![HACCP Friendly]()
HACCP Friendly
