Find a Service Center
- 1.4375" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| End Type | Open End |
| Inch/Metric | Inch |
| Bolt Hole Spacing | 5 1/8 in |
| Bolt Holes | 2 |
| Dynamic Load Rating | 6400 lbf |
| Length Through Bore | 1.48438 in |
| Bearing Design | Non-Expansion |
| Housing Height | 3 5/8 in |
| Bolt Hole Length | 31/32 in |
| Series | RAK Series |
| Base Length | 6 9/16 in |
| Seal Type | Contact Seals |
| Housing Construction | 1 Piece |
| Bearing Insert | G1107KRRB TDCF |
| Lubrication | Relubricatable |
| Base Width | 1 25/32 in |
| Static Load Rating [Max] | 3400 lbf |
| Overall Width | 2 11/64 in |
| Pillow Block Type | Thru-Bolt |
| Base Height | 21/32 in |
| Outer Ring Size | 207 |
| Temperature Range [Max] | 250 °F |
| Collar No. | S1107K |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Polymer |
| Bolt Hole Width | 9/16 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt | 1/2 in |
| Shaft Dia. | 1.4375 in |
| Collar O.D. | 2 1/8 in |
| Bearing Type | Ball Bearing |
| Weight | 1.872 LB |
| EAN or UPC | 87796180109 |
-
![HACCP Friendly]()
HACCP Friendly
