RAK2 1/8

RAK Series Cast Iron Pillow Block

Item #101020073

2.125" Shaft, 2.4375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type

Auto Replenish

each One-time purchase

Product Details

2.125" Shaft, 2.4375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type

Recommended for industrial applications where normal loads are encountered. They ensure the user the advantages of a compact, one-piece housing, which can be mounted in any position. The pillow blocks are self aligning at mounting with the spherical O.D. of the bearing fitting into a corresponding spherical housing seat. These units are prelubricated and ready for immediate installation. A grease fitting provides for relubrication if required. Self-locking collars are supplied with all units.

Specifications

Length Through Bore	2 3/16 in
Insert Type	Steel Insert
Static Load Rating [Max]	6,400.00 lbf
Bearing Insert	G1202KRRB
Locking Device	Eccentric Locking Collar
Shaft Dia.	2 1/8 in
Base Length	8 3/4 in
Bolt Holes	2
Base Width	2 5/16 in
Collar No.	S1202K
Bolt	5/8 in
Bolt Hole Width	23/32 in
Housing Material	Cast Iron
Bolt Hole Spacing	6 15/16 in
Seal Type	Contact Seals
Overall Width	2 7/8 in
Base Height	3/4 in
Center Line to Base Dimension [Min]	2 7/16 in
Bolt Hole Length	1 5/32 in
Collar O.D.	3 in
Bearing Design	Non-Expansion
Bearing Type	Ball Bearing
Inch/Metric	Inch
Pillow Block Type	Thru-Bolt
Mounted Unit Duty	Normal-Duty
Housing Height	4 29/32 in
End Type	Open End
Outer Ring Size	211
Housing Construction	1 Piece
Dynamic Load Rating	10,800.00 lbf
Lubrication	Relubricatable
Series	RAK Series
Weight	8.298 LB
EAN or UPC	87796061125