Find a Service Center
- 1.25" Shaft, 1.875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Base Length | 6 9/16 in |
| Outer Ring Size | 207 |
| Base Height | 23/32 in |
| Bearing Type | Ball Bearing |
| Collar O.D. | 2 1/8 in |
| Shaft Dia. | 1.25 in |
| Bolt Holes | 2 |
| Overall Width | 2 11/64 in |
| Inch/Metric | Inch |
| Length Through Bore | 1.48438 in |
| Seal Type | Contact Seals |
| Bolt Hole Length | 31/32 in |
| Collar No. | S1104K |
| Static Load Rating [Max] | 3400 lbf |
| Pillow Block Type | Thru-Bolt |
| Bearing Insert | G1104KRRB TDCF |
| Locking Device | Eccentric Locking Collar |
| Base Width | 1 25/32 in |
| Series | RAS Series |
| Bolt | 1/2 in |
| Dynamic Load Rating | 6400 lbf |
| Housing Construction | 1 Piece |
| Housing Material | Polymer |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt Hole Width | 9/16 in |
| Lubrication | Relubricatable |
| Temperature Range [Max] | 250 °F |
| Bolt Hole Spacing | 5 1/8 in |
| End Type | Open End |
| Housing Height | 3 11/16 in |
| Weight | 2.606 LB |
| EAN or UPC | 87796180161 |
-
![HACCP Friendly]()
HACCP Friendly
