Find a Service Center
- 1.4375" Shaft, 1.875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
- Polymer Housing
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bearing Insert | G1107KRRB TDCF |
| Series | RAS Series |
| End Type | Open End |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Base Width | 1 25/32 in |
| Seal Type | Contact Seals |
| Dynamic Load Rating | 6400 lbf |
| Outer Ring Size | 207 |
| Overall Width | 2 11/64 in |
| Length Through Bore | 1.48438 in |
| Bolt Holes | 2 |
| Locking Device | Eccentric Locking Collar |
| Pillow Block Type | Thru-Bolt |
| Bolt | 1/2 in |
| Collar O.D. | 2 1/8 in |
| Bolt Hole Width | 9/16 in |
| Bolt Hole Length | 31/32 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 5 1/8 in |
| Static Load Rating [Max] | 3400 lbf |
| Temperature Range [Max] | 250 °F |
| Housing Construction | 1 Piece |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Base Length | 6 9/16 in |
| Inch/Metric | Inch |
| Housing Height | 3 11/16 in |
| Housing Material | Polymer |
| Base Height | 23/32 in |
| Shaft Dia. | 1.4375 in |
| Weight | 1.68 LB |
| EAN or UPC | 87796180185 |
-
![HACCP Friendly]()
HACCP Friendly
