Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir synthetic rubber pillow blocks are designed for domestic heating, air-conditioning, ventilating equipment, and many other applications where low-cost, light-duty, and noiseless operation are essential. All units are available with the RA-RR extended inner ring bearings with positive contact, land riding seals and self-locking collar. An initial supply of long-life grease is provided in the one-piece, nonrelubricatable housings made of high grade, durable, molded synthetic rubber. Rubber pillow blocks with provision for relubrication are designated as the RBG series. At slight additional cost, both can be supplied with a .050" to .062" thick, corrosion-resistant steel strap for applications requiring greater rigidity. When the strap is reqired, add the suffix U to the pillow block designated as RGBU.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| End Type | Open End |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Light-Duty |
| Inch/Metric | Inch |
| Bearing Design | Non-Expansion |
| Base Width | 1 3/8 in |
| Collar O.D. | 1 47/64 in |
| Housing Height | 3 5/32 in |
| Bolt Hole Spacing | 4 1/2 in |
| Housing Width | 3 3/16 in |
| Shaft Dia. | 1.1875 in |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Rubber |
| Base Height | 3/4 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Width | 39/64 in |
| Seal Type | Contact Seals |
| Overall Width | 1 3/4 in |
| Insert Type | Steel Insert |
| Pillow Block Type | Thru-Bolt |
| Length Through Bore | 1.75 in |
| Collar No. | S1103K |
| Base Length | 6 in |
| Housing Construction | 1 Piece |
| Bearing Insert | RA103RR |
| Bolt Holes | 2 |
| Series | RBG Series |
| Housing Radial Load | 90 lbf |
| Weight | 1.368 LB |
| EAN or UPC | 87796058033 |
