Find a Service Center
- 2.1875" Shaft, 3.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| End Type | Open End |
| Bearing Insert | GN203KRRB |
| Locking Device | Eccentric Locking Collar |
| Collar No. | SN203K |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 2.1875 in |
| Base Width | 3 1/2 in |
| Insert Type | Steel Insert |
| Housing Material | Cast Iron |
| Base Length | 12 5/8 in |
| Bolt Holes | 2 |
| Bolt Hole Width | 7/8 in |
| Housing Construction | 1 Piece |
| Seal Type | Contact Seals |
| Lubrication | Relubricatable |
| Bolt Hole Length | 1 3/8 in |
| Inch/Metric | Inch |
| Bolt Hole Spacing | 10 1/4 in |
| Base Height | 1 7/16 in |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Type | Ball Bearing |
| Bearing Design | Non-Expansion |
| Weight | 20.37 LB |
| EAN or UPC | 87796061330 |
