Skip to content Skip to navigation menu
SAL Series Cast Iron 2-Bolt Ball Bearing Pillow Block

SAL1 15/16

SAL Series Cast Iron 2-Bolt Ball Bearing Pillow Block
Item #101020255
  • 1.9375" Shaft, 2.75" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
SAL Series Cast Iron 2-Bolt Ball Bearing Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.9375" Shaft, 2.75" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type

description

  • Fafnir SAL type pillow blocks are designed for applications where higher-than-usual temperatures are encountered and for normal temperature applications where for any reason one or more floating bearing units are required.The floating unit allows its bearing to move axially as the shaft expands becaue of the temperature rise, while the fixed unit maintains shaft location.Bearings also have loose internal fit. The SAL unit is equipped with a self-aligning SM wide inner ring bearing and a self-locking collar.An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type).By removing the spacer ring, the assembly becomes a floating unit.

applications

  • Conveyors
  • Food processing
  • Agriculture
  • Fans and blowers
Base Height 7/8 in
End Type Open End
Bolt Hole Spacing 8 1/4 in
Pillow Block Type Thru-Bolt
Base Width 2 3/4 in
Housing Width 5 1/4 in
Overall Width 4 19/32 in
Collar No. S1115K
Lubrication Relubricatable
Insert Type Steel Insert
Bearing Type Ball Bearing
Series SAL Series
Base Length 10 5/8 in
Housing No. T-12313
Bolt Hole Length 1 in
Shaft Dia. 1.9375 in
Housing Construction 1 Piece
Bolt Holes 2
Total Float 5/16 in
Mounted Unit Duty Medium-Duty
Seal Type Contact Seals
Bearing Insert SM1115KS
Bolt Size 5/8 in
Bearing Design Expansion/Non-Expansion
Length Through Bore 4.59375 in
Inch/Metric Inch
Locking Device Eccentric Locking Collar
Housing Material Cast Iron
Bolt Hole Width 3/4 in
Weight 18.568 LB
EAN or UPC 87796060753
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison