Find a Service Center
Alternate Products
- 1.25" Shaft, 1.6875" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Shaft Dia. | 1.25 in |
| Bolt Hole Width | N/A |
| Mounted Unit Duty | Normal-Duty |
| Inch/Metric | Inch |
| Bearing Insert | GYA103RRB2 |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| Bolt Hole Length | N/A |
| Bolt Hole Spacing Range [Min] | 3 in |
| Bolt Hole Size | N/A |
| Bolt Holes | 2 |
| Seal Type | Contact Seals |
| Bolt Hole Spacing Range [Max] | 3 in |
| Overall Width | 1 21/32 in |
| Bearing Design | Non-Expansion |
| Locking Device | Setscrew Locking Collar |
| Series | STB Series |
| End Type | Open End |
| Bolt Hole Spacing | 3 in |
| Base Width | 1 21/32 in |
| Insert Type | Steel Insert |
| Bearing Type | Ball Bearing |
| Housing Material | Cast Iron |
| Base Height | N/A |
| Bolt Size | 7/16-14 |
| Pillow Block Type | Tapped Base |
| Base Length | 4 in |
| Housing Height | 3 1/4 in |
| Weight | 2.51 LB |
| EAN or UPC | 87796179998 |
