Find a Service Center
Alternate Products
- 2.9375" Shaft, 3.3125" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Overall Width | 3 3/8 in |
| Base Length | 12 in |
| End Type | Open End |
| Length Through Bore | 3.0625 in |
| Bearing Design | Non-Expansion |
| Insert Type | Steel Insert |
| Bolt Hole Spacing | 9 1/2 in |
| Mounted Unit Duty | Normal-Duty |
| Collar O.D. | 3.619 in |
| Bolt Size | 3/4 in |
| Inch/Metric | Inch |
| Shaft Dia. | 2.9375 in |
| Bolt Holes | 2 |
| Base Height | 1 1/2 in |
| Locking Device | Setscrew Locking Collar |
| Series | YAK Series |
| Housing Height | 6 7/16 in |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing Range [Min] | 8 1/4 in |
| Pillow Block Type | Thru-Bolt |
| Lubrication | Relubricatable |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing Range [Max] | 10 3/4 in |
| Base Width | 3 1/4 in |
| Housing Material | Cast Iron |
| Bearing Insert | GY1215KRRB |
| Seal Type | Contact Seals |
| Weight | 19.25 LB |
| EAN or UPC | 87796157637 |
