Find a Service Center
Alternate Products
- Low Torque Style
- SLD 350 Type
- 24 mm Inside Diameter
- 28 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Locking Type | Internal Locking |
| Transmitted Torque (Max) | 62.3 lb/ft |
| Material | Silver/Metallic |
| I.D. | 24 mm |
| Total Width @ Relaxed State | 6.3 mm |
| Pressure on the Shaft | 20595 psi |
| Mountable Thickness | 0.248 in |
| Type | SLD 350 |
| Torque | 62 ft lb |
| Screw Material | Steel |
| Thickness | 0.248 in |
| Shaft Tolerance | -0.0005 in |
| Hub Bore Tolerance | 0.0008 in |
| Transmitted Axial Force | 1582 lb/ft |
| Style | Low Torque |
| Inch/Metric | Metric |
| O.D. | 28 mm |
| Pressure on the Hub | 14504 psi |
| Weight | 0.018 LB |
| EAN or UPC | 697904985139 |
