Find a Service Center
Alternate Products
- Low Torque Style
- SLD 350 Type
- 90 mm Inside Diameter
- 101 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Since ratchets include moving parts, periodic inspection, cleaning, lubrication with a light-grade oil and replacement of worn parts will become necessary
- Parts should not be replaced individually, but rather in total
| I.D. | 90 mm |
| Torque | 1945 ft lb |
| Transmitted Axial Force | 13171 lb/ft |
| Mountable Thickness | 0.669 in |
| Hub Bore Tolerance | 0.0014 in |
| Locking Type | Internal Locking |
| Material | Silver/Metallic |
| Pressure on the Shaft | 16099 psi |
| Inch/Metric | Metric |
| Shaft Tolerance | -0.0021 in |
| Screw Material | Steel |
| Thickness | 0.669 in |
| Type | SLD 350 |
| Total Width @ Relaxed State | 16.99 mm |
| O.D. | 101 mm |
| Transmitted Torque (Max) | 1945 lb/ft |
| Style | Low Torque |
| Pressure on the Hub | 14504 psi |
| Weight | 0.485 LB |
| EAN or UPC | 697904985368 |
