Find a Service Center
- Steel Material
features
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Browning Gears are rated in accordance with AGMA standards
- Adequate Bearing support Must be Provided
- Bevel and Miter Gears Develop Axial Thrust
| Bore Type | Minimum Plain Bore |
| Bore (Max) (in) | 1 |
| Hub Projection (in) | 0.875 |
| Bore (Min) (in) | 0.625 |
| Pitch Diameter (in) | 6 |
| Pressure Angle | 20 |
| Length Through Bore (in) | 1.25 |
| Face Width (in) | 0.61 |
| Mounting Distance | 1.688 |
| Number of Teeth/Threads | 96 |
| Diametral Pitch | 16 |
| Material | Steel |
| Bore Size (in) | 0.625 |
| Hub Diameter (in) | 1.75 |
| Weight | 3.32 LB |
| EAN or UPC | 662289144693 |
