Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Series | H Series |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Splines | 0 |
| Paint Code | A |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 14.1 |
| Mounting Holes | 3/8-16 |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Mount Type | 4 Bolt |
| Special Features | None |
| Motor Type | Spool Valve |
| Mounting Type Code | B |
| Port Type | Manifold |
| Flow Rate | 15 gal/min |
| Case Drain Code | 0 |
| Case Drain | None |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| RPM [Max] | 243 rpm |
| Special Features Hardware Code | 00 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Pilot Diameter | 1.75 in |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Hole Size | 3/8 in |
| Port Code | C |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pressure [Max] | 1450 psi |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Weight | 13.3 LB |
