Find a Service Center
- H Series
- 2-Bolt Flange
- 1 in Straight Shaft w/Woodruff Key
- 1/2 NPTF Side Port
- Nitrile Seals
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Series | H Series |
| Mounting Type Code | A |
| Port Type | NPTF |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Splines | 0 |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in Straight w/Woodruff Key |
| Case Drain | None |
| Paint/Packaging | N/A |
| Mounting Holes | 0.535 in |
| Paint Code | J |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Port Code | B |
| Port Size | 1/2 |
| Bolt Circle Dia. | 4.18 in |
| Displacement (in³/rev) | 2.8 |
| Mount Type | 2 Bolt Flange |
| Special Features | None |
| Seal Material | Buna-N |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Weight | 11.2 LB |
