Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Output Shaft Code | 02 |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Paint Code | A |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Shaft Type | Splined |
| Mount Type | 4 Bolt |
| Splines | 6 |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Series | H Series |
| Pilot Diameter | 1.75 in |
| RPM [Min] | 585 rpm |
| Port Code | B |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Mounting Hole Size | 3/8 in |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 5.9 |
| Mounting Type Code | B |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Special Features Hardware Code | 00 |
| Port Size | 1/2, 1/2-14 |
| RPM [Max] | 585 rpm |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | NPTF |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Special Features | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Shaft Size & Type | 1 in - 6T Spline |
| Weight | 11.8 LB |
