Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Location | Side Port |
| Special Features | None |
| Case Drain | None |
| Paint Code | A |
| Port Type | NPTF |
| RPM [Max] | 304 rpm |
| Case Drain Code | 0 |
| Mount Type | 4 Bolt |
| Port Size | 1/2 |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| RPM [Min] | 304 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features Hardware Code | 00 |
| Shaft Type | Splined |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Port Code | B |
| Shaft Size & Type | 1 in - 6T Spline |
| Seal Material | Buna-N |
| Pilot Diameter | 1.75 in |
| Bolt Circle Dia. | 3 1/4 in |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Series | H Series |
| Pressure [Max] | 1600 psi |
| Mounting Type Code | B |
| Mounting Holes | 3/8-16 |
| Output Shaft Code | 02 |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 11.29 |
| Flow Rate | 57 lpm |
| Mounting Hole Size | 3/8 in |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Weight | 12.8 LB |
