Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Shaft Size & Type | 1 in - 6T Spline |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 57 lpm |
| Corrosion Resistant | No |
| Output Shaft Code | 02 |
| Motor Element | Gerotor |
| Case Drain Code | 0 |
| RPM [Max] | 192 rpm |
| Splines | 6 |
| Shaft Type | Splined |
| RPM [Min] | 192 rpm |
| Special Features | None |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Type Code | B |
| Port Size | 1/2, 1/2-14 |
| Series | H Series |
| Material | Cast Iron |
| Mounting Hole Size | 3/8 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint Code | A |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 17.9 |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| Port Type | NPTF |
| Port Code | B |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Case Drain | None |
| Flange Orientation | Standard |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 1350 psi |
| Mount Type | 4 Bolt |
| Mounting Holes | 3/8-16 |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 3 1/4 in |
| Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
| Weight | 14.0 LB |
