Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.19 in |
| Displacement (in³/rev) | 5.9 |
| Port Size | SAE-10, 7/8-14 UNF |
| Series | H Series |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Shaft Size & Type | 1 in - 6T Spline |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 6 |
| RPM [Max] | 585 rpm |
| Output Shaft Code | 02 |
| Material | Cast Iron |
| Paint Code | A |
| Special Features | None |
| Pressure [Max] | 1800 psi |
| Mounting Holes | 0.535 in |
| Port Type | SAE O-Ring |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Port Code | A |
| Duty | Standard-Duty |
| Case Drain | None |
| RPM [Min] | 585 rpm |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 0 |
| Port Size & Location | SAE-10 Side |
| Flow Rate | 15 gal/min |
| Case Drain Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Flow [Max] | 15 gal/min |
| Shaft Type | Splined |
| Weight | 11.8 LB |
