
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
Mounting Holes | 0.535 in |
Bolt Circle Dia. | 4.19 in |
Paint Code | A |
Rotation | Standard Rotation |
Shaft Type | Straight w/ Woodruff Key |
Motor Element | Gerotor |
Splines | 0 |
Special Features Assembly Code | 2 |
Special Features Hardware Code | 00 |
Flange Orientation | Flange Rotated 90° |
Corrosion Resistant | No |
Paint/Packaging | Low Gloss Black, Individual Box |
Case Drain | None |
Pressure [Max] | 1800 psi |
Motor Type | Spool Valve |
Port Type | SAE O-Ring |
Pilot Diameter | 3.25 in |
Case Drain Code | 0 |
Displacement (in³/rev) | 2.8 |
Flow [Max] | 12 gal/min |
Material | Cast Iron |
Output Shaft Code | 01 |
Series | H Series |
Port Size | SAE-10, 7/8-14 UNF |
Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
Port Code | A |
Special Features | Flange Rotated 90° |
Flow Rate | 12 gal/min |
RPM [Max] | 969 rpm |
Mounting Type Code | A |
Shaft Size & Type | 1 in x 1/4 in Straight |
Duty | Standard-Duty |
Mounting Hole Size | 0.535 in |
Port Location | Side Port |
Mount Type | 2 Bolt |
Inlet Pressure [Max] | 2500 psi |
Port Size & Location | SAE-10 Side |
Seal Material | Buna-N |
Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
Weight | 13.0 LB |
