Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | NPTF |
| Displacement (in³/rev) | 17.9 |
| Special Features Hardware Code | AA |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | 1/2, 1/2-14 |
| Special Features | Free Running Gerotor |
| Pressure [Max] | 1350 psi |
| RPM [Max] | 192 rpm |
| Material | Cast Iron |
| Flow Rate | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.19 in |
| Port Code | B |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Geroter/Geroler Options | Free Running |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.535 in |
| RPM [Min] | 192 rpm |
| Mounting Type Code | A |
| Seal Material | Buna-N |
| Weight | 13.0 LB |
