Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Port Size & Location | SAE-10 Side |
| Shaft Type | Straight w/ Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Mounting Type Code | A |
| Case Drain | None |
| Bolt Circle Dia. | 4.187 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 17.94 |
| Output Shaft Code | 01 |
| Flow Rate | 14 gal/min |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Flow [Max] | 15 gal/min |
| Pressure [Min] | 600 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flange Orientation | Standard |
| Special Features Hardware Code | AB |
| Pilot Diameter | 3.25 in |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Pressure [Max] | 1350 psi |
| Corrosion Resistant | No |
| Special Features | Low Speed Valve |
| Rotation | Standard Rotation |
| Series | H Series |
| RPM [Min] | 192 rpm |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| RPM [Max] | 192 rpm |
| Material | Cast Iron |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.565 in |
| Mount Type | 2 Bolt |
| Port Type | SAE O-Ring |
| Motor Type | Spool Valve |
| Port Code | A |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Weight | 13.0 LB |
