Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- M8 X 1.25-6H Manifold Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain Code | 2 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.535 in |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Shaft Type | Straight |
| Output Shaft Code | 24 |
| Paint Code | A |
| Material | Cast Iron |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 585 rpm |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | Straight |
| RPM [Min] | 585 rpm |
| Bolt Circle Dia. | 4.19 in |
| Port Type | Manifold |
| Motor Type | Spool Valve |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
| Special Features Assembly Code | 0 |
| Flow Rate | 15 gal/min |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 5.9 |
| Port Code | D |
| Weight | 13.0 LB |
