Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 9.7 |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Mounting Type Code | A |
| Corrosion Resistant | No |
| Mounting Hole Size | 0.535 in |
| Flange Orientation | Standard |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Special Features | None |
| Series | H Series |
| Flow Rate | 15 gal/min |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Case Drain Code | 1 |
| Paint Code | A |
| RPM [Min] | 353 rpm |
| Mount Type | 2 Bolt |
| Port Size | SAE-10, 7/8-14 UNF |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Bolt Circle Dia. | 4.19 in |
| Port Size & Location | SAE-10 Side |
| Pilot Diameter | 3.25 in |
| RPM [Max] | 353 rpm |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Splines | 0 |
| Duty | Standard-Duty |
| Port Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1650 psi |
| Weight | 13.0 LB |
