Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Case Drain | None |
| Displacement (in³/rev) | 2.2 |
| Pressure [Max] | 1800 psi |
| Mounting Hole Size | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 1021 rpm |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Corrosion Resistant | No |
| Shaft Type | Straight w/ Woodruff Key |
| Flow [Max] | 10 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Series | H Series |
| Special Features | Free Running Gerotor |
| Paint Code | A |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Port Code | C |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 10 gal/min |
| Motor Element | Gerotor |
| Pilot Diameter | 3.25 in |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Port Type | Manifold |
| Geroter/Geroler Options | Free Running |
| Special Features Hardware Code | AA |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Splines | 0 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Material | Cast Iron |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| RPM [Max] | 1021 rpm |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Weight | 13.0 LB |
