Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 7.32 |
| Port Size | Manifold, M8 x 1.25 Threads |
| Shaft Type | Straight |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Shaft Size & Type | Straight |
| Mount Type | 2 Bolt |
| Flow Rate | 57 lpm |
| Bolt Circle Dia. | 4.187 in |
| Motor Type | Spool Valve |
| Pressure [Max] | 1800 psi |
| Port Type | Manifold |
| Port Code | D |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 469 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Series | H Series |
| Mounting Hole Size | 0.565 in |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Special Features | None |
| Motor Element | Gerotor |
| Splines | 0 |
| Case Drain Code | 2 |
| Output Shaft Code | 24 |
| Case Drain | G 1/4 (BSP) |
| RPM [Min] | 469 rpm |
| Special Features Hardware Code | 00 |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Paint Code | A |
| Mounting Type Code | A |
| Seal Material | Buna-N |
| Weight | 13.0 LB |
