Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | Straight |
| Case Drain Code | 2 |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Port Code | E |
| Flow [Max] | 10 gal/min |
| Pilot Diameter | 3.25 in |
| Port Size | 1/2, G 1/2 |
| Geroter/Geroler Options | Free Running |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Paint Code | A |
| Port Type | BSPP |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.535 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Special Features Hardware Code | AA |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Pressure [Max] | 1800 psi |
| Special Features | Free Running Gerotor |
| Port Location | Side Port |
| Shaft Type | Straight |
| Output Shaft Code | 24 |
| Bolt Circle Dia. | 4.19 in |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| RPM [Min] | 1021 rpm |
| Flow Rate | 10 gal/min |
| Series | H Series |
| RPM [Max] | 1021 rpm |
| Rotation | Standard Rotation |
| Splines | 0 |
| Displacement (in³/rev) | 2.2 |
| Corrosion Resistant | No |
| Weight | 13.0 LB |
