Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 BSPP Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain | G 1/4 (BSP) |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Output Shaft Code | 24 |
| RPM [Max] | 469 rpm |
| Flow Rate | 15 gal/min |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight |
| Shaft Size & Type | Straight |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Case Drain Code | 2 |
| Seal Material | Buna-N |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Port Code | E |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1800 psi |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Port Size | 1/2 |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Series | H Series |
| Port Type | BSPP |
| Displacement (in³/rev) | 7.3 |
| Corrosion Resistant | No |
| Special Features Hardware Code | 00 |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.19 in |
| Paint Code | A |
| Weight | 13.0 LB |
