Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 8.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Element | Gerotor |
| RPM [Max] | 385 rpm |
| Paint Code | A |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 8.9 |
| Material | Cast Iron |
| Splines | 0 |
| Series | H Series |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1700 psi |
| Port Code | C |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Mounting Type Code | B |
| Special Features | None |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Port Location | Side Port |
| Mounting Hole Size | 3/8 in |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Mount Type | 4 Bolt |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 3/8-16 |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Output Shaft Code | 01 |
| Pilot Diameter | 1.75 in |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | Manifold |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Weight | 12.4 LB |
