Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pressure [Max] | 1650 psi |
| Paint Code | A |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Splines | 0 |
| Series | H Series |
| Flow Rate | 14 gal/min |
| Port Size & Location | SAE-10 Side |
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Case Drain Code | 0 |
| Output Shaft Code | 08 |
| Bolt Circle Dia. | 3 1/4 in |
| Corrosion Resistant | No |
| Mount Type | 4 Bolt |
| Rotation | Standard Rotation |
| Shaft Size & Type | Straight |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 3/8 in |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| RPM [Max] | 353 rpm |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| RPM [Min] | 353 rpm |
| Shaft Type | Straight w/ Cross Hole |
| Displacement (in³/rev) | 9.7 |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Port Type | SAE O-Ring |
| Case Drain | None |
| Port Code | A |
| Special Features | None |
| Mounting Holes | 3/8-16 |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Weight | 12.5 LB |
